SeMSy® Pro II Server Plus

The SeMSy^® Pro II Server Plus manages all statuses, streams and connections of the surveillance system including the management of virtual matrices.

All necessary software licences are already installed and pre-configured.

Features:

Simultaneous processing of up to 1,500 video channels per 1x SeMSy^® Pro II Server Plus¹⁾
Cascadable for an unlimited number of video channels
Internal hard disks: up to 3x 3,5" HDDs
Integrated DVD+RW/DL drive
DIN EN 50130-4 compliant

Variantes
Disques durs
Options
Vue d'ensemble

201.448.1

000.0

SeMSy® Pro II Server Plus avec 1x 500 GB DD

000077	-	HDD 1000 GB, SATA, 3.5"	-
000084	-	HDD 2000 GB, SATA, 3.5"	-
000107	-	HDD 500 GB, SATA, 3.5"	-

Service additionnel
000178	-	Mounting of a HDD Montage d’un disque dur, test de fonctionnement, test de fonctionnement long terme, test final, acceptation et validation inclues	-
We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier. Hard disks for security applications As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation. Click here to read more about the enormous stress that hard disks used in security applications are subject to... As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear. Quality control Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations. Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments. Once a hard disk is fitted into a recording system the first function test is carried out (recording and display). Subsequently a long-term test of at least 24 hours is carried out (image recording). Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function. Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment. Please note: With RAID systems hard disks of the same capacity (GB) must be used! With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

000010		19" Bracket Fixation 19" pour l'installation de DMS, DVS, PVS IV, PVS 7
000283		RAID 1 RAID 1 pour dispositifs avec 2x DDs de la même capacité de mémoire (ex usine)	-

201.448.1

000.0

SeMSy® Pro II Server Plus avec 1x 500 GB DD

Disques durs

000077	-	HDD 1000 GB, SATA, 3.5"	-
000084	-	HDD 2000 GB, SATA, 3.5"	-
000107	-	HDD 500 GB, SATA, 3.5"	-

Service additionnel
000178	-	Mounting of a HDD Montage d’un disque dur, test de fonctionnement, test de fonctionnement long terme, test final, acceptation et validation inclues	-
We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier. Hard disks for security applications As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation. Click here to read more about the enormous stress that hard disks used in security applications are subject to... As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear. Quality control Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations. Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments. Once a hard disk is fitted into a recording system the first function test is carried out (recording and display). Subsequently a long-term test of at least 24 hours is carried out (image recording). Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function. Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment. Please note: With RAID systems hard disks of the same capacity (GB) must be used! With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

Options

000010		19" Bracket Fixation 19" pour l'installation de DMS, DVS, PVS IV, PVS 7
000283		RAID 1 RAID 1 pour dispositifs avec 2x DDs de la même capacité de mémoire (ex usine)	-

Les marques auxquelles un ® a été attribué sont les marques déposées de Dallmeier electronic: Vue d'ensemble
Les marques auxquelles un * a été attribué sont des marques ou marques déposées des propriétaires suivants: Vue d'ensemble

Recommander cette page !

Dallmeier electronic

Dallmeier recorders now with PDA connectivity

SeMSy® Pro II Server Plus

Disques durs

Options

Téléchargement

Back Panel