Dallmeier electronic

Dallmeier recorders now with PDA connectivity


 

DIS-2/M UTP

Module d'encodeur, 1× voie analogique, D1, enregistrement audio et vidéo intégré

DIS-2/M UTP, 1-Kanal Audio- und Videoencoder

Le DIS-2/M UTP est un encodeur audio et vidéo analogique de construction modulaire avec la possibilité d'enregistrement audio et vidéo. Il peut recevoir des données audio et vidéo via son entrée BNC, S-Video ou UTP, les encoder simultanément et les mettre à la disposition pour la reproduction à une station de travail (par ex. avec SMAVIA Viewing Client ou SeMSy® III) à travers d'Ethernet (unicast oder multicast). En plus, il peut enregistre le stream encodé sur la disque dur interne.

Le DIS-2/M UTP est conçu pour le montage et le fonctionnement dans un support de module montable sur bâti 19". Ainsi en cas de panne, le module DIS-2/M UTP peut être changé rapidement et facilement (HotPlug).

Caractéristiques

  • 1× voie d'enregistrement d'audio et vidéo analogique
  • Supporte les caméras analogiques de Dallmeier et de marque tierce
  • Compression vidéo MPEG-2, MPEG-4, MJPEG
  • Compression audio MPEG-1 Layer 2, G.711
  • Taux de trame jusqu'à 25 ips
  • Résolution SD jusqu'à D1
  • Débit binaire jusqu'à 16 Mbps (constant ou dynamique)
  • Enregistrement en temps réel et streaming simultanés
  • Visionnement en direct et reproduction à travers d'Ethernet
  • Configuration à l'aide d'un navigateur web à travers d'Ethernet
  • Évalutation avec SMAVIA Viewing Client ou SeMSy® III à travers d'Ethernet
  • Détection de mouvement et SmartFinder intégrés
  • Gestion des utilisateurs intégrée
  • Système d'exploitation Linux sur mémoire Flash (propriétaire, hardened)
  • Entrée de vidéo UTP (Unshielded Twisted Pair)

002167-DIS-2/M UTP 550
Module encodeur, sans DD, max. 1× DD, 1× voie de vidéo, pour un support de module de construction DIS-2/M BGT 550
002171-DIS-2/M UTP 700
Module encodeur, sans DD, max. 2× DD, 1× voie de vidéo, pour un support de module de construction DIS-2/M BGT 700
000077-HDD 1000 GB, SATA, 3.5"-
000084-HDD 2000 GB, SATA, 3.5"-
000107-HDD 500 GB, SATA, 3.5"-

Service additionnel
000178-Mounting of a HDD
Montage d’un disque dur, test de fonctionnement, test de fonctionnement long terme, test final, acceptation et validation inclues
-

We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier.

Hard disks for security applications
As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation.

Click here to read more about the enormous stress that hard disks used in security applications are subject to...

As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear.

    Quality control
  • Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations.

  • Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments.

  • Once a hard disk is fitted into a recording system the first function test is carried out (recording and display).

  • Subsequently a long-term test of at least 24 hours is carried out (image recording).

  • Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function.

  • Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment.

    Please note:
  • With RAID systems hard disks of the same capacity (GB) must be used!       

  • With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.
002148402DIS-2/M BGT 550
Support de module (L 550 mm × 3 UH) pour le montage de jusqu'à 10× modules DIS-2 (variante 550), bloc d'alimentation et ventilateur inclus
002150401DIS-2/M BGT 700
Support de module (L 700 mm × 3 UH) pour le montage de jusqu'à 10× modules DIS-2 (variante 700), bloc d'alimentation et ventilateur inclus
000273-DLC - DualStreaming
Licence pour l'enregistrement vidéo et le streaming vidéo avec une qualité différente
-
002167-DIS-2/M UTP 550
Module encodeur, sans DD, max. 1× DD, 1× voie de vidéo, pour un support de module de construction DIS-2/M BGT 550
002171-DIS-2/M UTP 700
Module encodeur, sans DD, max. 2× DD, 1× voie de vidéo, pour un support de module de construction DIS-2/M BGT 700

 Disques durs

000077-HDD 1000 GB, SATA, 3.5"-
000084-HDD 2000 GB, SATA, 3.5"-
000107-HDD 500 GB, SATA, 3.5"-

Service additionnel
000178-Mounting of a HDD
Montage d’un disque dur, test de fonctionnement, test de fonctionnement long terme, test final, acceptation et validation inclues
-

We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier.

Hard disks for security applications
As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation.

Click here to read more about the enormous stress that hard disks used in security applications are subject to...

As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear.

    Quality control
  • Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations.

  • Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments.

  • Once a hard disk is fitted into a recording system the first function test is carried out (recording and display).

  • Subsequently a long-term test of at least 24 hours is carried out (image recording).

  • Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function.

  • Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment.

    Please note:
  • With RAID systems hard disks of the same capacity (GB) must be used!       

  • With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

 Options

002148402DIS-2/M BGT 550
Support de module (L 550 mm × 3 UH) pour le montage de jusqu'à 10× modules DIS-2 (variante 550), bloc d'alimentation et ventilateur inclus
002150401DIS-2/M BGT 700
Support de module (L 700 mm × 3 UH) pour le montage de jusqu'à 10× modules DIS-2 (variante 700), bloc d'alimentation et ventilateur inclus

 Licences

000273-DLC - DualStreaming
Licence pour l'enregistrement vidéo et le streaming vidéo avec une qualité différente
-

  

Les marques auxquelles un ® a été attribué sont les marques déposées de Dallmeier electronic: Vue d'ensemble
Les marques auxquelles un * a été attribué sont des marques ou marques déposées des propriétaires suivants: Vue d'ensemble