SeMSy® Pro II Server Plus

The SeMSy^® Pro II Server Plus manages all statuses, streams and connections of the surveillance system including the management of virtual matrices.

All necessary software licences are already installed and pre-configured.

Features:

Simultaneous processing of up to 1,500 video channels per 1x SeMSy^® Pro II Server Plus¹⁾
Cascadable for an unlimited number of video channels
Internal hard disks: up to 3x 3,5" HDDs
Integrated DVD+RW/DL drive
DIN EN 50130-4 compliant

¹⁾ For every 1500x channels is 1x SeMSy® Pro II Server Plus required

Technical details...

Variants
HDD
Options
General overview

201.448.1

000.0

SeMSy® Pro II Server Plus with 1x 500 GB HDD

Please note: At least one HDD must be ordered together with the device (for operating system and recording). You can access two additional HDDs to increase storage capacity!

000077	-	HDD 1000 GB, SATA, 3.5"	-
000084	-	HDD 2000 GB, SATA, 3.5"	-
000107	-	HDD 500 GB, SATA, 3.5"	-

Additional services
000178	-	Mounting of a HDD Mounting of a HDD incl. function, long-term-, and final test, acceptance and approval	-
We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier. Hard disks for security applications As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation. Click here to read more about the enormous stress that hard disks used in security applications are subject to... As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear. Quality control Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations. Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments. Once a hard disk is fitted into a recording system the first function test is carried out (recording and display). Subsequently a long-term test of at least 24 hours is carried out (image recording). Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function. Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment. Please note: With RAID systems hard disks of the same capacity (GB) must be used! With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

000010		19" Bracket 19" bracket for the installation of DMS, DVS, PVS IV, PVS 7
000283		RAID 1 RAID 1 for devices with 2x HDDs of the same capacity (only ex factory)	-

201.448.1

000.0

HDD

000077	-	HDD 1000 GB, SATA, 3.5"	-
000084	-	HDD 2000 GB, SATA, 3.5"	-
000107	-	HDD 500 GB, SATA, 3.5"	-

Additional services
000178	-	Mounting of a HDD Mounting of a HDD incl. function, long-term-, and final test, acceptance and approval	-
We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier. Hard disks for security applications As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation. Click here to read more about the enormous stress that hard disks used in security applications are subject to... As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear. Quality control Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations. Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments. Once a hard disk is fitted into a recording system the first function test is carried out (recording and display). Subsequently a long-term test of at least 24 hours is carried out (image recording). Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function. Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment. Please note: With RAID systems hard disks of the same capacity (GB) must be used! With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

Options

000010		19" Bracket 19" bracket for the installation of DMS, DVS, PVS IV, PVS 7
000283		RAID 1 RAID 1 for devices with 2x HDDs of the same capacity (only ex factory)	-

Trademarks which are designated by ® are registered trademarks of Dallmeier electronic: Overview
Trademarks designated by * are trademarks or registered trademarks of the following owners: Overview

Recommend this page!

Dallmeier electronic

Dallmeier recorders now with PDA connectivity

SeMSy® Pro II Server Plus

HDD

Options

Download data sheet

Back Panel