Dallmeier electronic

Dallmeier recorders now with PDA connectivity


 

DIS-2/M Multi-D HD

Decoder Module, 1× IP Channel, 1080p, Integrated Audio and Video Storage

The DIS-2/M Multi-D HD is an audio and video decoder with integrated audio and video storage. It is able to receive audio and video streams in various encodings via an Ethernet network (unicast or multicast), decode them in real-time via its BNC or HDMI interface. It additionally is able to save simultaneously the received live stream on the internal hard disk. The evaluation of the saved live stream is possible at any time on a workstation via Ethernet (e.g. with SMAVIA Viewing Client or SeMSy® III).

The DIS-2/M Multi-D HD is designed for installation and operation in a 19" module rack. In the case of a service, the DIS-2/M Multi-D HD modules can be quickly and easily exchanged (hot-plug functionality).

Features

  • 1× IP audio and video channel
  • Supports network cameras of Dallmeier and third-party suppliers
  • Supports network cameras of Dallmeier with integrated motion detection and SmartFinder
  • Supports recorders of Dallmeier incl. access to track modes via SeMSy® III
  • Supported video formats MPEG-2, MPEG-4, H.264
  • Supported audio formats MPEG-1 Layer 2, G.711
  • Supported frame rate up to 50 fps / 60 fps
  • Supported resolutions SD, HD (720p, 1080i, 1080p)
  • Supported bit rate up to 16 Mbps (constant or dynamic)
  • Simultaneous decoding, output and storage
  • Fast display times (little delay of less than 100 ms)
  • BNC output SDTV (PAL/NTSC)
  • HDMI output HDTV (SMPTE 296M, SMPTE 274M), Full HD
  • Upscaling from SDTV to HDTV is supported
  • Configuration with web browser via Ethernet
  • Evaluation of saved live streams with SMAVIA Viewing Client or SeMSy® III via Ethernet
  • User administration integrated
  • Linux operating system (proprietary and hardened) on flash memory

002158-DIS-2 Multi-D HD 550
Decoder module, without HDD, max. 1× HDD, 1× video channel, for module rack DIS-2/M BGT 550
002160-DIS-2 Multi-D HD 700
Decoder module, without HDD, max. 2× HDD, 1× video channel, for module rack DIS-2/M BGT 700
000077-HDD 1000 GB, SATA, 3.5"-
000084-HDD 2000 GB, SATA, 3.5"-
000107-HDD 500 GB, SATA, 3.5"-

Additional services
000178-Mounting of a HDD
Mounting of a HDD incl. function, long-term-, and final test, acceptance and approval		-

We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier.

Hard disks for security applications
As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation.

Click here to read more about the enormous stress that hard disks used in security applications are subject to...

As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear.

    Quality control
  • Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations.

  • Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments.

  • Once a hard disk is fitted into a recording system the first function test is carried out (recording and display).

  • Subsequently a long-term test of at least 24 hours is carried out (image recording).

  • Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function.

  • Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment.

    Please note:
  • With RAID systems hard disks of the same capacity (GB) must be used!       

  • With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.
002148402DIS-2/M BGT 550
Module rack (L 550 mm × 3 HU) for installation of up to 10× DIS-2 modules (variant 550), incl. power supply unit and fan
002150401DIS-2/M BGT 700
Module rack (L 700 mm × 3 HU) for installation of up to 10× DIS-2 modules (variant 700), incl. power supply unit and fan
002158-DIS-2 Multi-D HD 550
Decoder module, without HDD, max. 1× HDD, 1× video channel, for module rack DIS-2/M BGT 550
002160-DIS-2 Multi-D HD 700
Decoder module, without HDD, max. 2× HDD, 1× video channel, for module rack DIS-2/M BGT 700

 HDD

000077-HDD 1000 GB, SATA, 3.5"-
000084-HDD 2000 GB, SATA, 3.5"-
000107-HDD 500 GB, SATA, 3.5"-

Additional services
000178-Mounting of a HDD
Mounting of a HDD incl. function, long-term-, and final test, acceptance and approval		-

We provide you with high-value hard disks for professional security applications. The choice is yours between loose HDDs without installation or HDDs already fitted by Dallmeier.

Hard disks for security applications
As opposed to hard disks that are available for purchase, all Dallmeier hard disks are specifically designated for 24-hour security applications. Comprehensive stress tests and stringent quality controls ensure that the hard disks are measure up to the load associated with a permanent operation.

Click here to read more about the enormous stress that hard disks used in security applications are subject to...

As a matter of fact a hard disk which is to be used for permanent recording in security applications is exposed to high stress and is thus subject to highest wear and tear.

    Quality control
  • Before a hard disk model is cleared, it is thoroughly tested according to the Dallmeier testing regulations.

  • Every delivered batch of hard disks is subjected to an incoming control prior to being used; no matter if the hard disks are meant for fitting or replacement parts shipments.

  • Once a hard disk is fitted into a recording system the first function test is carried out (recording and display).

  • Subsequently a long-term test of at least 24 hours is carried out (image recording).

  • Only then the final test of the recording system is conducted. The recordings made are also tested as are the image display and the search function.

  • Following the final test the technically responsible employee counter-checks the positive result and clears the recording device for shipment.

    Please note:
  • With RAID systems hard disks of the same capacity (GB) must be used!       

  • With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4 Eco. Those hard disks do not have to match the storage capacity of the hard disks used in the recording device.

 Options

002148402DIS-2/M BGT 550
Module rack (L 550 mm × 3 HU) for installation of up to 10× DIS-2 modules (variant 550), incl. power supply unit and fan
002150401DIS-2/M BGT 700
Module rack (L 700 mm × 3 HU) for installation of up to 10× DIS-2 modules (variant 700), incl. power supply unit and fan

  

Trademarks which are designated by ® are registered trademarks of Dallmeier electronic: Overview
Trademarks designated by * are trademarks or registered trademarks of the following owners: Overview